Alankomaat
Albania
Amerikan yhdysvallat
Argentiina
Australia
Belgia
Bosnia ja Hertsegovina
Brasilia
Bulgaria
Chile
Espanja
Etelä-Afrikka
Filippiinit
Irlanti
Iso-Britannia
Italia
Itävalta
Kanada
Kolumbia
Kreikka
Kroatia
Latvia
Liettua
Luxemburg
Meksiko
Moldova
Montenegro
Norja
Pohjois-Makedonia
Portugali
Puola
Ranska
Romania
Ruotsi
Saksa
Serbia
Slovakia
Slovenia
Suomi
Sveitsi
Tanska
Turkki
Tšekin tasavalta
Ukraina
Unkari
Uusi-Seelanti
Viro
Turbosound TFX122M-AN Aktiivinen lavamonitori
Merkki: Turbosound
Tuotekoodi: 838812
Merkki: Turbosound
Tuotekoodi: 838812
Turbosound TFX122M-AN Aktiivinen lavamonitori
The Turbosound TFX122M-AN is a 1,100 W active 12" coaxial stage monitor built for touring musicians, worship teams, and live venues. Klark Teknik Class-D amplification drives a custom 12" woofer and 1" titanium-dome compression driver through a 60° × 40° waveguide for consistent coverage across the stage. Onboard DSP, ULTRANET digital audio networking, and a low-profile plywood cabinet make this wedge a flexible, road-ready monitoring solution.
- Coaxial 12" LF / 1" HF driver arrangement projects sound from a single point so every performer hears the same mix.
- Klark Teknik Class-D amp delivers 1,100 W of headroom while keeping the cabinet light enough for daily load-ins.
- Built-in DSP with dynamic EQ, multiband limiting, and position-compensation presets lets FOH engineers tune the wedge quickly.
- ULTRANET RJ45 ports carry 16 channels of 24-bit digital audio over a single Cat 5 cable for tidy stage runs.
Coaxial 12" Active Stage Monitor with Touring-Grade Headroom
The Turbosound TFX122M-AN is a 1,100 W powered 12" two-way floor monitor built for portable speech and music reinforcement. A custom high-excursion 12" low-frequency driver pairs with a 1" titanium-dome compression driver on a low-distortion waveguide, delivering 75 Hz to 18 kHz (±3 dB) and 125 dB peak SPL. Designed to operate without an external controller, the wedge drops straight into touring, club, and theater rigs.
Coaxial Driver Geometry and Klark Teknik DSP
What sets this monitor apart is its coaxial driver geometry: the 1" high-frequency driver sits at the centre of the 12" woofer, so highs and lows radiate from one acoustic point. That layout keeps off-axis response consistent as performers move across the wedge. A Klark Teknik DSP engine adds dynamic EQ, multiband limiting, and position-compensation presets for floor or stand placement.
Power, Drivers, and Connectivity — What the Specs Mean Onstage
Every spec on this wedge is aimed at fast setup and a stable, full-range monitor mix. The Class-D amplifier pushes 1,100 W from a 15 mm plywood cabinet weighing 16.9 kg.
- Output Power: 1,100 W peak — headroom for full-band stage volume
- Drivers: 12" high-excursion LF + 1" titanium-dome HF compression driver — coaxial point-source imaging keeps the mix consistent off-axis
- Frequency Response: 75 Hz to 18 kHz (±3 dB) — full-range vocal and instrument monitoring
- Coverage: 60° H × 40° V rotatable waveguide — aim the wedge at the performer instead of the audience
- Networking: 2x RJ45 ULTRANET, 16 channels / 24-bit over Cat 5 — single-cable digital audio runs replace bulky multicores
Built for Touring Bands, Worship Teams, and Mobile PA Rigs
The Turbosound TFX122M-AN is the right choice for live performers and engineers who need a road-ready wedge with high SPL, consistent coverage, and digital networking. Touring bands benefit from the coaxial driver's uniform off-axis response, keeping vocalists hearing the same mix from any position. Worship teams and AV crews gain fast setup through ULTRANET digital audio runs and DSP presets that compensate for floor or stand placement. Mobile DJs and venue operators get a 1,100 W Class-D wedge that pairs cleanly with active subwoofers via the XLR Thru output.
Tyyppi
Kaiuttimet
USB
Teho RMS
Virtalähde
240 V
UK/EU-virtalähde mukana
Ei
Valmistettu
Kiina
Asiakirjat
Käyttöohjeet
Tietoa valmistajasta
Turvallisuusohjeet
Katso tämän tuotteen turvallisuusohjeet käyttöoppaasta.
