Tascam Model 12 Miksauspöytä

Tascam Model 12 — All-in-One Mixer, Recorder, Interface & DAW Controller

The Tascam Model 12 is a hybrid production workstation that combines a 10-channel analogue-style mixer, a 12-track SD card recorder, a 12-in/10-out USB audio interface, and a HUI/MCU DAW control surface in a single 343 × 360 × 99 mm desktop chassis. It is aimed at songwriters, podcasters, content creators, and live performers who want to record, mix, and stream without stacking separate devices. This model is the right choice for creators who need a tactile console workflow with computer-free multitrack capture and full DAW integration in one box.

What Stands Out in the Hybrid Mixer Category

Unlike most hybrid desks, the Model 12 is built around a digital mixer engine, which makes built-in DAW control possible—a capability the analogue-based Model 16 and Model 24 do not offer. Its Ultra HDDA (High Definition Discrete Architecture) mic preamps deliver an Equivalent Input Noise of –128 dBu, giving the desk a notably low noise floor for capturing vocals and acoustic sources. Podcast and live-stream workflows benefit from a dedicated 3.5 mm TRRS smartphone input with mix-minus, dual independent headphone buses, and onboard Bluetooth 5.0 streaming.

Recording Engine — Capture Without a Computer

Running as a true standalone production console, the internal multitrack recorder lets up to 12 tracks (10 input channels plus the stereo mix) be captured simultaneously to SD, SDHC, or SDXC media at 24-bit / 48 kHz, with overdubbing, punch-in/out, and a built-in metronome with Tap Tempo. WAV files can be imported from other Model Series mixers and exported directly to a DAW for further editing.

• Simultaneous Record Tracks: 12 (10 inputs + stereo mix) — enough for a full band in one pass
• Recording Media: SD / SDHC / SDXC up to 512 GB (Class 10 or higher) — flexible storage with no computer required
• WAV files are captured in broadcast-grade 16 / 24 bit at 44.1 / 48 kHz for seamless editing and archiving.

Mixer Architecture — Analogue Feel, Digital Routing

The mixer section combines the immediacy of a small-format analogue console with the routing flexibility of a digital engine. Each of the ten input channels carries a one-knob compressor, a 3-band EQ with sweepable mid, a 100 Hz low-cut filter, and a 60 mm fader, while the master section adds a semi-parametric 3-band EQ for final polish. Two Aux sends feed monitors and the 16-type onboard effects engine, and the dual headphone outputs can each carry their own discrete mix for engineer and performer.

• Mic Preamps: 8 × Ultra HDDA with +48 V phantom power — clean, low-noise capture for any microphone
• The instrument inputs support 8 Hi-Z (CH 1–8) for direct guitar and bass connection without a DI box.
• Internal Effects: 16 presets including Hall, Room, Plate, Delay, Chorus, Flanger, and combined reverb variants — add space and dimension without external processors

Connectivity & DAW Integration — Modern Workflow Ready

With its rear-panel USB Type-C port, the Model 12 becomes a 12-in/10-out audio interface for any major DAW, while HUI/MCU protocol emulation adds hands-on control of faders, mutes, pans, solos, transport, and jog wheel over Pro Tools, Logic Pro, Cubase, Ableton Live, Digital Performer, Cakewalk by BandLab, Studio One, Reaper, and Cubasis. Bluetooth 5.0 (Class 2, approx. 10 m range) streams audio wirelessly to the MAIN bus or CH 9/10, and 5-pin MIDI In/Out plus MIDI clock and MTC support keep external drum machines and sequencers locked to the session.

• Use 12 in / 10 out via USB Type-C (USB 2.0 High-Speed, class-compliant) for multitrack roundtrip with any DAW.
• Bluetooth: Version 5.0, A2DP with SBC and AAC codecs — wireless phone or laptop playback into the mix
• Smartphone Input: 3.5 mm TRRS with mix-minus — clean call-in audio for podcasts and interviews
• Output Delay: 0–2,000 ms in 1 ms steps — keeps audio and video in sync during live streams

Who Will Benefit from the Model 12

This model suits solo songwriters, small bands, podcasters, and live-streaming creators who want a single piece of hardware to replace a mixer, audio interface, multitrack recorder, and DAW controller. Producers capturing a full band in a home studio can record 12 simultaneous tracks without starting up a computer, and podcasters can run remote interviews through the dedicated TRRS smartphone input with mix-minus. Live performers take advantage of the dual headphone outputs, click output with Tap Tempo, and VAMP playback function for looping song sections on stage. Integration with Pro Tools, Logic, Cubase, Ableton, Studio One, or Reaper is made easy, with faders and transport controls mapped directly to their DAW through HUI/MCU emulation.

Tascam's Portastudio Heritage

Tascam's Model Series builds on the company's Portastudio legacy, the original cassette-based multitrack recorders that put project studios within reach of independent musicians. The Model 12 advances that tradition by combining a familiar analogue-style console layout with a modern digital recorder, USB-C interface, and DAW control surface, plus Bluetooth streaming, mix-minus podcasting, and an adjustable output delay for video sync. The integrated design brings Tascam's recording heritage into today's hybrid studio and live environments.