Our long-term experience with the production of Double locking tremolos has gone into the development of this identical tremolo. Exchangeable knife edges made of hardened steel and cast steel saddles, combined with a solid tremolo block provide perfect sound transmission and an extremely long sustain.
The tremolo radius is 12", the radius of the nut element is 10". This is related to the taper of the fingerboard and has, in all previous experience, resulted in optimal playing properties.
You can simply pull out the knife edges with a pliers and push the new ones into the insertion slot.
Technical specifications
- Saddles and locking nut from hardened steel
- Distance height adjustment screws 74.3 mm according to international standards (sometimes only 74mm, it is identical)
- Size press-in bushing 10 mm
- String spacing (E-e): 54 mm
- Slideway intonation: 8.5 mm
- Tremolo baseplate: zinc cast
- Weight: 439 g with block length 37 mm
- Maximum string gauge: .080
- Tremolo saddle radius: 12"; if you put the shim (43 x 12,8 x 0.3 mm) under the saddles away you get 16".
- Tremolo block (brass): with 3 fixing screws at a distance of 17 mm
- The saddles are marked with dots. The saddles are mounted on the baseplate from the outside with increasing numerical values to the inside. The saddles outside for the E and e-strings have no dot. For example, the strings A and h could have one dot and the two inner saddles D + G two dots.
Scope of supply
- 1 x Locking nut complete with 2 pairs of mounting screws
- 1 x String retainer with mounting screws 2.2 x 16 mm
- 1 x Tremolo claw complete with mounting screws 4.2 x 45 mm and 3 tremolo springs
- 2 x Mounting studs M7 x 0.5 with 2 threaded bushings diameter 10 mm
- 3 x Allen keys (2.0/2.5/3.0 mm)
- 1 x Tremoloblock
Vesiurheilu
Urheilu
fi
