Muzikerin verkkosivuston evästeiden tarkoituksena on tehdä vierailustasi sivustollamme miellyttävä kokemus joka kerta. Suostu kaikkien evästeiden käyttöön klikkaamalla "Hyväksyn" -painiketta tai valitse asetuksista vain haluamasi evästeet.
Lisätietoja.
Compact and lightweight, AIR15 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and...
Lue lisää
Vain ennakkotilauksena
Toimitusaika ilmoitetaan tilauksen jälkeen toimittajallamme.
Yritämme täydentää tavaroita varastossamme tilauksesi perusteella ja otamme sinuun yhteyttä toimituspäivämäärän ilmoittamiseksi.
Jos et halua odottaa, tarkista vaihtoehtoiset tuotteet (4).
Compact and lightweight, AIR15 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR15 gives you all the power and tools you need for both mobile and installed sound. Each type of power amplifier has advantages and disadvantages. By employing different amplifier types for each driver, AIR15 loudspeakers use the respective strengths of Class D and Class A/B amplifiers to provide optimal response throughout the speaker’s frequency range.
A
500W (continuous), Class D amplifier powers the 15-inch low-frequency
driver, providing efficient, clean power for gut-shaking low end when
you need it. A 200W (continuous), Class A/B amplifier powers the
1.35-inch high-frequency driver, delivering a natural sounding, "AIR-y"
high end. The combination can deliver up to 132 dB SPL of sweet, clear
sound between 40 Hz and 20 kHz. The AIR15 loudspeaker is equipped with
an easy-to-use signal processor that makes it simple to customize your
loudspeakers with the push of a button. Presets customize the AIR15’s
response for use as front-of-house mains; as monitor wedges; for music
playback (e.g., for DJs); for enhanced low end and a warmer sound; and
for improved speech intelligibility. Treble and bass controls let you
boost or cut by 10 dB to compensate for room anomalies. Location presets
let you optimize performance for stand and bracket mounting as well as
flown installations.
Features Main Components Hybrid “best of both worlds” 1,200W (dynamic) power amp configuration: Low-frequency driver: 500W (continuous), Class D amplifier High-frequency driver: 200W (continuous), Class A/B amplifier Maximum SPL 132 dB peak 1.35-inch, high-frequency compression driver 15-inch woofer with a 2.5-inch voice coil 45 Hz to 20 kHz frequency response 132 dB SPL (max) 90° x 60° (horizontal x vertical) dispersion pattern Onboard mixer with two combo XLR and ¼” inputs and one summed balanced output Controls Easy-to-use DSP performance presets: DJ—music playback FOH—normal front-of-house o Enhance – enhanced low end for a warmer sound Monitor – optimized for floor wedge placement Speech—applications where speech intelligibility is critical EQ HF response ±10 dB LF response ±10 dB Additional presets and controls: Stand—for mounting on a pole or tripod Bracket - for wall-mount applications Suspend – for suspended applications Convenience Features Multi-angle enclosure for mains or monitor-wedge applications Comfortable ergonomic handle 35 mm pole socket with 7.5˚ downward tilt M10 rigging points for suspended installation Defeatable front-panel LED Rugged plastic enclosure Tour-grade, 16 gauge steel grille
Vesiurheilu
Urheilu
fi
