Neutrik NC3MX XLR-liitin
Tuotekoodi: NC3MX | ID: 1802
Industry-standard 3-pole male cable connector from X series that is easy to assemble with only 4 UL recognized components and no screws. It provides an improved chuck type strain relief for secure clamping of all cables that provides higher pull-out force and makes assembly much faster. Connector features a compact design with sturdy rugged zinc die-cast shell, a fibreglass reinforced hard plastic insert, a nickel housing and silver contacts, and a boot with rubber gland that gives high protection against bending stresses.
Specs:
Electrical | |
Capacitance between contacts | ≤ 4 pF |
Contact resistance | ≤ 3 mΩ |
Dielectric strength | 1,5 kVdc |
Insulation resistance | > 10 GΩ (initial) |
Rated current per contact | 16 A |
Rated voltage | < 50 V |
Mechanical | |
Cable O.D. | 3.5 - 8.0 mm |
Insertion force | ≤ 20 N |
Withdrawal force | ≤ 20 N |
Lifetime | > 1000 mating cycles |
Wiresize | max. 2.5 mm² |
Wiresize | max. 14 AWG |
Wiring | Solder contacts |
Locking device | Latch lock |
Material | |
Boot | Polyurethan |
Contact plating | 2 µm Ag |
Contacts | Brass (CuZn39Pb3) |
Insert | Polyamide (PA 6.6 30 % GR) |
Locking element | Zinc diecast (ZnAl4Cu1) |
Shell | Zinc diecast (ZnAl4Cu1) |
Shell plating | Nickel |
Strain relief | Polyacetal (POM) |
Environmental | |
Flammability | UL 94 HB |
Standard compliance | IEC 61076-2-103 |
Protection class | IP 40 |
Solderability | Complies with IEC 68-2-20 |
Temperature range | -30 °C to +80 °C |
Parametrit ja tiedot
Yleispistemäärä perustuu 6 käyttäjien arvostelua: