Citadel Dynazero Kitaraefekti

The Dynazero noise gate combines an adaptive input detector with true galvanic isolation between the detector and gain reduction block. The adaptive detector responds to the playing dynamics and changes its timing accordingly, delivering transparent gating action for different styles from subtle fingerpicking to serious chugging.

Threshold
The threshold control sets the level at which the gate opens, allowing signals above this level to pass through while attenuating or muting signals below it.

Hard | Soft
This switch modifies the gate's response time for different playing styles.

4 Cable Method
This wiring is possible with the 4 connectors on the Dynazero. It is typically used by connecting the guitar directly to the input, utilizing the clean signal to control the gating, with the gain reduction occurring after preamp distortion.

2 Cable Method
This straightforward wiring setup is also possible with the Dynazero, requiring only the input and output connectors, with the send and return connectors left disconnected.