Muzikerin verkkosivuston evästeiden tarkoituksena on tehdä vierailustasi sivustollamme miellyttävä kokemus joka kerta. Suostu kaikkien evästeiden käyttöön klikkaamalla "Hyväksyn" -painiketta tai valitse asetuksista vain haluamasi evästeet.
Lisätietoja.
Designed for use with brass, saxophone and other instruments, the ATM350UL UniMount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a...
Designed for use with brass, saxophone and other instruments, the ATM350UL UniMount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491U universal clip-on mount and strong, flexible AT8490L 9" gooseneck, the mic can be clipped securely to the bell of your instrument and positioned to stay where you want it – the gooseneck won’t flop around no matter how aggressively you move the instrument as you play. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
Features Low-profile mic design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hypercardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option
Specs Element Fixed-charge Back Plate, Permanently Polarized Condenser Polar Pattern Cardioid Frequency Response 40 – 20,000 Hz Low Frequency Roll-off 80 Hz, 12 dB/octave Open Circuit Sensitivity –49 Db (3.5 Mv) Re 1v At 1 Pa Impedance 200 Ohms Maximum Input Sound Level 159 dB SPL, 1 Khz At 1% T.H.D. Dynamic Range (Typical) 130 dB, 1 Khz At Max SPL Signal-to-noise Ratio 65 dB, 1 Khz At 1 Pa Phantom Power Requirements 11– 52V DC, 3.5 Ma Typical Switch Flat, Roll-off Weight (Microphone) 14.5 g (0.5 Oz) Weight (Power Module) 90 g (3.2 Oz) Dimensions (Microphone) 37.8 mm (1.49'') Long, 12.2 mm (0.48'') Maximum Body Diameter Dimensions (Power Module) 92 mm (3.62") Long, 18.9 mm (0.74") Diameter Output Connector (Power Module)Integral 3-pin XLRM-type Cable 4.0 m (13.1') Long (Permanently Attached To Microphone), 3.2 mm (0.13") Diameter, 2-conductor Shielded Cable With Hirose Hr10-type Connector
Vesiurheilu
Urheilu
fi
