Seajet 012 Universal Primer Antifouling-maali

Universal primer / undercoat is an one-component universal primer for use above the waterline! Characteristics: - Shows good anticorrosive properties. - Can be used as a primer and undercoat. Type: Alkyd based one-component primer / undercoat. Recommended use: - Universal primer for non-immersed areas and bilges. - Undercoat for SEAJET 122 BRILLIANCE TOPCOAT. Application details: - Thinner: SEAJET thinner U, - Application Data: Airless spray, brush, roller, - Min.Temperature: -5 °C, - Max. humidity: 85% R.H. Boat type: - Bare fibreglass: Abrade using P180-240 abrasive paper followed by final cleaning. Apply a single coat of SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT. - Steel hulls: Sand blast to SA 2½ or hand sanding with P180-P240. Apply 2 coats of SEAJET 117 followed by 2 coats of SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT. - Aluminum: Apply one coat of SEAJET 017 followed by 2 coats SEAJET 117 and 2 coats SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT, followed by the remaining top coats. - Bare wood: Sand with P180-240 grade abrasive paper at 45° to the grain. Degrease using thinner wiping. Then apply 3-4 coats of SEAJET 012 UNIVERSAL PRIMER/UNDERCOAT. After application of primer the topcoat can be applied. Coverage rate when rolling: 9-10m²/lt Pack size: 2.5lt Colours: Off-white Where can I use this primer?: Above water only!