Valitse maa, johon lähetys toimitetaan

RockBoard RBO POW ISO 6 IEC Virtalähteen adapteri

Tuotekoodi: 1338177

RockBoard RBO POW ISO 6 IEC Virtalähteen adapteri

Tuotekoodi: 1338177

The RockBoard ISO Power Block V6 IEC is an isolated multi power supply that powers up to six effects pedals from a single mains connection. Six galvanically isolated outputs, advanced high-frequency filtering, and per-slot short-circuit protection keep the signal chain free of hum and digital noise. A 5V USB-A port adds flexibility for small…

RockBoard RBO POW ISO 6 IEC Virtalähteen adapteri

The RockBoard ISO Power Block V6 IEC is an isolated multi power supply that powers up to six effects pedals from a single mains connection. Six galvanically isolated outputs, advanced high-frequency filtering, and per-slot short-circuit protection keep the signal chain free of hum and digital noise. A 5V USB-A port adds flexibility for small accessories, while the compact aluminium housing fits neatly under most pedalboards.

  • 6 galvanically isolated DC outputs plus 1x 5V USB-A port (2000 mA) for accessories
  • 2 switchable outputs (9V/12V/15V/18V) cover a wide range of pedal voltages
  • Per-slot short-circuit protection with dedicated status LEDs
  • Compact 130 x 88 x 35 mm aluminium housing at just 386 g
Tarkempaa kuvausta omalla kielelläsi ei ole vielä saatavilla. Englanninkielinen kuvaus saattaa auttaa.

Isolated Multi Power Supply for Pedalboards

The RockBoard ISO Power Block V6 IEC delivers clean, noise-free DC power to up to six effects pedals from a single mains socket. Each output is galvanically isolated, preventing ground loops and the high-frequency whine that plagues daisy-chained setups. A 5V USB-A port adds room for charging phones or running USB-driven pedals without a separate wall wart.

What Sets This Power Supply Apart

Every output runs through its own transformer stage, so a short circuit on one pedal will not take down the rest of the rig. Two switchable slots can be set to 9V, 12V, 15V, or 18V, covering standard overdrives through vintage 18V circuits. The universal 100–230V AC input and IEC mains socket mean any kettle lead can be swapped in on the road.

Output Configuration

The layout matches a real-world gigging board: two high-current 9V slots at 500 mA for hungry digital units, two standard 9V slots at 250 mA for analog drives, and two flexible slots that switch between 9V, 12V, 15V, and 18V. All connections use the standard 2.1 x 5.5 mm barrel plug with centre-negative polarity.

  • Switchable outputs: 2x 9V/12V/15V/18V DC — covers standard, mid-voltage, and 18V pedals
  • Fixed 9V outputs: 2x 500 mA + 2x 250 mA — headroom for current-hungry DSP pedals
  • USB-A port: 5V, 2000 mA — powers phones or USB-driven pedals

Protection and Filtering

Each output carries its own short-circuit protection and a dedicated status LED, so a fault on one pedal is isolated and the remaining slots keep running. Advanced filtering tackles high-frequency interference before it reaches the pedal.

  • Isolation: 6 galvanically isolated transformers — eliminates ground loops between pedals
  • Short-circuit protection: per-slot with status LED — one fault does not kill the board

Build and Package

A compact aluminium enclosure sits flat under a pedalboard. Running on 100–230V AC at 47–63 Hz, the IEC mains input works worldwide without a voltage converter. The box includes six 60 cm RockBoard flat power cables and one IEC mains cable.

  • Dimensions: 130 x 88 x 35 mm — slim enough to fit under most boards
  • Weight: 386 g — light enough not to weigh down a gig bag

Käyttötarkoitus

Tyyppi

Virtalähde

Toiminnot

Lähtöjen määrä

6

Panokset ja tuotokset

Napaisuus

Keskusta miinus

USB

Kyllä

Pakkaus

Pakkauksen sisältö

Virtajohto

Virtalähde

Jännite

9 V, 12V, 15V, 18V

Pistoketyyppi

Tynnyri

Virtalähde

Virtajohto

Tarvikkeet

UK/EU-virtalähde mukana

Ei

Mitat ja paino

Leveys (mm)

88

Syvyys (mm)

130

Korkeus (mm)

35

Nettopaino (kg)

0,386

Maa

Valmistettu

Kiina

Asiakirjat

Käyttöohjeet
Tietoa valmistajasta
Valmistaja:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Saksa
Vastuuhenkilö:
Warwick GmbH & Co Music Equipment KG
Turvallisuusohjeet

Katso tämän tuotteen turvallisuusohjeet käyttöoppaasta.