RockBoard RBO POW BLO ISO 10V2 Virtalähteen adapteri
The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably.
- 10 galvanically isolated outputs (8 x 9V at 150 mA + 2 x 18V at 400 mA) for powering a full pedalboard from one unit
- Advanced filter technology eliminates high-frequency noise; external transformer blocks low-frequency interference
- Per-outlet short-circuit protection with status LEDs isolates faults without shutting down the rest of the rig
- Includes 18V DC adapter with multi-regional plugs, 10 flat power cables, plus voltage and current doubler Y-cables
Clean Isolated Power for a Full Pedalboard
The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that replaces a tangle of single adapters with one compact unit. Ten transformer-isolated outputs feed up to ten pedals at once, so a complete board of drives, modulations, delays and digital units can run from a single mains feed. The ISO Power Block V10 is the right choice for guitarists, bassists and keyboard players who need quiet, reliable power for a medium-to-large pedalboard without ground-loop hum.
Standout Engineering
Each output sits behind its own isolation transformer, so noise from one pedal cannot bleed into another. Advanced filtering technology in every slot suppresses high-frequency interference, while the external 18V power adapter keeps low-frequency noise away from the audio path. Per-outlet short-circuit protection with a status LED means a single faulty cable will not bring the rest of the rig down.
Power Outputs and Voltage Configuration
- 9V Outputs: 8 isolated slots, 150 mA each — handles standard analog pedals and most digital units
- 18V Outputs: 2 isolated slots, 400 mA each — covers power-hungry digital and dual-voltage pedals
- Total Current Capacity: 2,000 mA — enough headroom for a fully loaded board
Filtering and Protection
- Galvanic Isolation: transformer-isolated per output — eliminates ground loops between pedals
- HF Filtering: advanced filter technology in each slot — kills digital whine and RF interference
- Short-Circuit Protection: per-outlet with status LED — a fault on one slot leaves the others running
Physical Specs and Package Contents
- Dimensions: 123 x 70 x 26 mm — slim enough to mount beneath a RockBoard or any standard board
- Weight: 180 g — light enough not to weigh down a touring rig
- Connector: 2.1 x 5.5 mm barrel, center negative — the industry-standard stompbox plug
- Included: 18V DC adapter with EU/UK/US/AU plug adapters, 10 x 60 cm flat power cables, voltage doubler Y-cable (blue), current doubler Y-cable (white)
Tyyppi
Lähtöjen määrä
Napaisuus
Pakkauksen sisältö
Lataajan tyyppi
Virta
Pistoketyyppi
Virtalähde
Adapteri
UK/EU-virtalähde mukana
Kyllä
Leveys (mm)
70
Syvyys (mm)
123
Korkeus (mm)
26
Nettopaino (kg)
0,18
Valmistettu
Kiina
Asiakirjat
Käyttöohjeet
Tietoa valmistajasta
Turvallisuusohjeet
Katso tämän tuotteen turvallisuusohjeet käyttöoppaasta.
