RCF ART 915-A Aktiivinen kaiutin

RCF ART 915-A — 15-Inch Active Speaker Built for Touring Output

The RCF ART 915-A is a professional 15-inch active speaker that delivers 2,100 W of Class-D bi-amplified power in a 22.4 kg cabinet light enough for solo load-in. Its 15" woofer and 1.75" compression driver combination pushes up to 131 dB SPL with a linear 45 Hz – 20 kHz frequency response, giving FOH engineers and mobile DJs a single-box solution for clubs, houses of worship, and corporate events. Shaping a coherent 100° × 60° coverage pattern is the job of the True Resistive Waveguide, while convection cooling through a solid aluminum heat exchanger means zero fan noise on stage.

What Sets This Model Apart in Its Class

Two RCF-developed DSP systems define this cabinet: FiRPHASE delivers zero-degree phase coherence without EQ coloration, while Bass Motion Control replaces the conventional high-pass filter with a custom algorithm that maps woofer excursion in real time. With a 1.75" compression driver made from a Polyimide-Kapton dome rated at ten times the durability of previous designs, reliability is significantly improved. M-brace internal reinforcement locks the four cabinet walls to the amplifier chassis, eliminating resonance at peak SPL.

Power, Transducers, and Connectivity — Specs That Matter On Stage

Splitting 2,100 W peak between 1,400 W to the low-frequency channel and 700 W to the high-frequency channel, the amplifier uses a 1,800 Hz crossover and a soft limiter to protect both drivers from thermal and RMS overload. Inputs accept balanced or unbalanced signals via XLR and 6.3 mm jack, with an XLR link output available for daisy-chaining to a second cabinet or subwoofer.

• Max SPL: 131 dB — plenty of headroom for mid-size venues without external subs
• Frequency Response: 45 Hz – 20 kHz — single-box full-range sound for versatile use
• The amplification section is a 2,100 W Class-D bi-amp (1,400 W LF + 700 W HF peak)
• LF Driver: 15" woofer with 2.5" voice coil — tested at 200 hours continuous signal
• Connection options include XLR and 6.3 mm jack in, XLR link out, 35 mm pole mount, and M10 rigging points for varied setups

Who Should Choose the 915-A

Mobile DJs and solo audio operators looking for flagship SPL from a cabinet they can carry themselves will find the 915-A the right choice. Live bands benefit from the 15" woofer's low-end reach — reviewers report usable bass response down to the 40 Hz range without a paired subwoofer. Houses of worship, schools, and corporate A/V teams will appreciate the M10 rigging points and 35 mm pole socket for permanent installs. The convection-cooled amplifier is silent for ceremonies, conferences, and broadcast scenarios where fan noise would be unacceptable.