Delphin Etna E3 Trip 3,6 m 3,0 lb 2 osaa

Delphin TRIP E3 is an unconventionally designed carp rod, built on the basis of the legendary ETNA. Its essence is hidden in the lower part designed with a retractable section, respectively. telescopic. Since the rod is not divided symmetrically, but asymmetrically ,you will save tens of centimeters of space compared to the classic two-part rod, which you will undoubtedly appreciate through its transport dimensions. In addition, this modification does not adversely affect behavior of the blank! Base of the rod is a high-quality slim blank, which can easily handle casting or fighting. The fully parabolic action perfectly dampens the lunges of fish and you will enjoy fighting every carp that has been deceived.

Delphin 2Power technology was applied to the rod, which consists of PowerWrap and PowerJoin elements. Both of these segments provide a significant improvement in the mechanical properties of the blank, which in practice results in much higher durability and longer product life. PowerWrap is an additional carbon winding around the rod blank, noticable on the first contact with the rod. The main task of this technology is to significantly increase the strength, but it also creates a very interesting visual element. PowerJoin is a very inconspicuous detail at first glance, but it is no less important. The essence is a small metal ring placed on the joint of the rod, ie in the place where the individual parts slide into each other. The purpose of the ring is to minimize the possibility of fragmentation damage to the blank and thus its partial deterioration.

TRIP has very strong SIC eyelets perfectly guiding the line without unnecessary friction and resistance. The rubber-coated FullShrink handle fits perfectly in the hand and the rod works comfortably even at low temperatures.

So if you are one of the carp anglers who do not love the long transport dimensions of the classic two-piece rods, then TRIP will reliably solve this problem.

Technical parameters:

Model: 360 cm / 3.00 lbs /

• Number of parts: 2 (lower part is telescopic)
• Blank diameter above the handle: 12.5 mm
• Number of guide eyes: 6
• Transport length: 153 cm
• Weight: 350 g
• Handle: split, EVA foam + Shrink tube
• Handle length (from the bottom of the rod to the center of the seat): 63.5 cm
• Guide eye size: #50

Model: 360 cm / 3,25 lbs /

• Number of parts: 2 (lower part is telescopic)
• Blank diameter above the handle: 13.0 mm
• Number of guide eyes: 6
• Transport length: 153 cm
• Weight: 350 g
• Handle: split, EVA foam + Shrink tube
• Handle length (from the bottom of the rod to the center of the seat): 63.5 cm
• Guide eye size: #50

Model: 390 cm / 3.50 lbs /

• Number of parts: 2 (lower part is telescopic)
• Blank diameter above the handle: 16.0 mm
• Number of guide eyes: 6
• Transport length: 166 cm
• Weight: 550 g
• Handle: split, EVA foam + Shrink tube
• Handle length (from the bottom of the rod to the center of the seat): 67 cm
• Guide eye size: #50