Behringer PMP 6000 Tehomikseri

Behringer PMP 6000 EUROPOWER — 1600W Powered Mixer for Live Sound

The Behringer PMP 6000 EUROPOWER combines a 20-channel console, dual 24-bit effects engines, and a Class-D power amplifier into a 13.1 kg unit. Rated at 2 x 800W stereo or 1,600W in bridged mono, this powered mixer suits medium-sized venues where separate amp racks are impractical.

Class-D Amplification, FBQ Feedback Detection, and XPQ 3D Surround

What separates this mixer from conventional powered consoles is high-efficiency Class-D amplification, the proprietary FBQ Feedback Detection System, and the XPQ 3D stereo surround effect. FBQ lights up the LED on the EQ fader where feedback is occurring, turning a normally frustrating live-sound problem into a one-knob fix.

Amplifier Power and Operating Modes

Three operating modes let the PMP 6000 adapt to any gig. Stereo mode delivers 800W peak per channel into 4 ohms, while bridged mono combines both channels into a single 1,600W output for subwoofer stacks.

• Stereo Output (peak): 2 x 800W @ 4 ohms — drives two full-range tops for a band or DJ setup.
• Bridged Mono Output (peak): 1,600W @ 8 ohms — concentrates total power into a single subwoofer.
• Class-D amplifier topology with switch-mode power supply — keeps total weight at 13.1 kg while reducing heat output.

Channel Count, Mic Preamps, and EQ

The mixing section gives operators 20 input channels split across mono mic/line and stereo line inputs. The first 12 channels carry XENYX mic preamps with switchable +48V phantom power, 3-band EQ with sweepable mid, and inserts.

• Mic Preamps: 12 x XENYX with +48V phantom power — bandwidth below 10 Hz to above 200 kHz, 130 dB dynamic range.
• Channel EQ: 3-band with sweepable mid — Low 80 Hz / ±15 dB, Mid 100 Hz–8 kHz / ±15 dB, High 12 kHz / ±15 dB.
• Two monitor sends per mono channel — build separate wedge mixes for vocalists and instrumentalists.

Built-In Effects, Graphic EQ, and I/O

Two independent 24-bit stereo Multi-FX processors live inside the console, each loaded with 100 presets covering reverbs, delays, chorus, flanger, pitch shifter, and multi-effects. Speakon-compatible locking speaker outputs, RCA 2-track I/O, and a headphone jack round out the connectivity.

• FX Engines: Dual 24-bit Delta-Sigma, 46.875 kHz, 100 presets each — apply different effects to vocals and monitors.
• Master EQ: Stereo 7-band graphic with FBQ Feedback Detection — LEDs light up at the feedback frequency.
• Professional twist-lock Speakon-compatible speaker outputs — MAIN L/R 4–8 ohms, BRIDGE 8–16 ohms.

Ideal for Bands, Houses of Worship, and Mobile DJs

The PMP 6000 is the right choice for working bands, worship teams, schools, and mobile DJs who need a complete front-of-house rig in one road case. Solo performers running a stereo pair of tops plus a sub will appreciate the bridged-mono mode that pushes 1,600W into a single cabinet, while small venues benefit from the dual mono configuration that splits power between FOH and stage monitors.

Behringer EUROPOWER Series

The EUROPOWER line represents Behringer's flagship range of powered mixers, engineered in Germany to bring integrated Class-D amplification to working musicians. Behringer has refined its FBQ Feedback Detection System for more than 20 years across standalone processors before integrating it into the master EQ of every EUROPOWER console.