cookies
Huomaat, että "evästeemme" ovat herkullisia
Muzikerin verkkosivuston evästeiden tarkoituksena on tehdä vierailustasi sivustollamme miellyttävä kokemus joka kerta. Suostu kaikkien evästeiden käyttöön klikkaamalla "Hyväksyn" -painiketta tai valitse asetuksista vain haluamasi evästeet. Lisätietoja.
Samaa mieltä
Hylkää
Myynti on päättynyt

Antelope Audio Edge Quadro

Most advanced modeling microphone by Antelope Audio. This stereo mic features two large dual-membrane capsules and a rotating head. Delivering four channels for independent processing will allow for stereo techniques like M/S, X/Y, Blumlein, and...
Myynti on päättynyt
Tätä tuotetta ei enää valmisteta tai se ei kuulu enää valikoimaamme.

Tuotekoodi: EDGE-QUADRO | ID: 294380

Antelope Audio Edge Quadro

Most advanced modeling microphone by Antelope Audio. This stereo mic features two large dual-membrane capsules and a rotating head. Delivering four channels for independent processing will allow for stereo techniques like M/S, X/Y, Blumlein, and even 3D sound. Edge Quadro is the only microphone you’ll need for stereo and 360° sound recording. Two capsules perfectly aligned to eliminate any phase related problems made of 6-micron gold-sputtered dual-membranes each. Top head can be rotated at any angle even while recording so you can monitor any possibility for capturing your source. Achieve anything from M/S, X/Y, Blumlein and 360 recording with a total of 18 emulations! Specifications: Microphone type: Quadrosonic condenser microphone, Diaphragms: Two large condenser capsules with double-sided 6u-gold sputtered membranes. Top head is fully rotatable. , Diaphragm diameter: 34mm, Polar pattern: Multi-pattern (cardioid, figure-8, omnidirectional, Blumlein, M/S, X/Y), XY-stereo – set both capsules to Cardioid, offset 90°, Mid-side stereo – set the top capsule to Cardioid, and the bottom capsule to figure-8, Blumlein – Set both capsules to Figure-8, offset 90°, Self-noise: 19dB(A), SNR: 75dB(A), Frequency response: 20HZ ~ 20kHZ, Sensitivity: -35dB | 18mV/Pa (-1 to +3dB), THD+N: -116dB, Output impedance: 50 Ohms @ 1kHz, Power requirements: 48V DC phantom power, Output connector: 5-pin male XLR, Dimensions: 11,9″ x 2,1″ (303mm x 53mm), Weight: 1. 697 lbs (770 grams)

Parametrit ja tiedot

Maa

Valmistettu

Kiina


Suositellut lisävarusteet