Light4Me MH 7R 230W Beam

Light4Me MH 7R BEAM 230W — Tight-Beam Moving Head With LED Ring

The Light4Me MH 7R BEAM 230W is a beam-class moving head designed for stages, clubs, and event productions that need long-throw, pencil-sharp aerial beams. At its core sits a 230W 7R discharge lamp that pushes light through a 4° beam angle, producing the narrow, high-intensity shafts that beam fixtures are known for. A surrounding SMD RGB LED ring adds a secondary layer of color and motion, so the head can deliver both a hard beam and a glowing halo from a single fixture. The Light4Me MH 7R BEAM 230W is the right choice for lighting designers and operators who need a high-output beam head with both discharge-lamp punch and modern LED accent effects.

What Makes This Beam Head Stand Out

What separates this fixture from a plain beam head is the combination of a 7R discharge lamp with an integrated SMD RGB LED ring, plus a rotating 6+12 facet prism that multiplies a single beam into a wide fan of sharp rays. Twelve half colors on the color wheel, 15 static gobos, and a linear electronic focus give operators more looks than the hard beam alone.

Light Source and Beam Output

The lamp and beam geometry define how a beam head reads on stage, and this model is built for maximum throw and definition. The narrow 4° beam angle keeps the light concentrated, so beams stay visible across long distances and through haze.

• Light Source: 230W 7R discharge lamp + SMD RGB LED ring — discharge lamp delivers the hard beam, LED ring adds color accent
• Beam Angle: 4° — narrow pencil beam for long-throw aerial effects
• LED Ring: 23 × 0.2 W RGB 3-in-1 SMD LEDs — 7 static colors and 21 dynamic macros for halo effects

Movement and Control

Fast, accurate movement and a flexible control system are essential for a beam head used in live shows. The 540° pan and 270° tilt range covers almost any stage position, while multiple operating modes let the head run standalone or as part of a larger DMX rig.

• Pan / Tilt Range: 540° / 270° — wide coverage for totems, trusses, and floor mounts
• DMX Channels: 16 — full control over pan, tilt, color, gobo, prism, dimmer, strobe, and focus
• Operating Modes: auto, DMX, master/slave, sound, manual — flexible control for any rig size
• Music-Controlled Programs: Yes — sound mode

Effects, Optics, and Build

The optical toolkit is what turns a single beam into a full visual show. An 11-color wheel with 12 half colors, a 15-gobo static wheel, a rotating prism, and electronic focus give operators the tools to switch between hard beams and projected patterns without changing fixtures.

• Color Wheel: 11 colors + open, 12 half colors
• Gobo Wheel: 15 static patterns + open
• Prism: 6+12 facet, rotating — multiplies the beam into a wide fan of sharp rays
• Dimmer / Strobe: linear 0–100% electronic dimmer, 1–25 Hz strobe
• Focus: electronic, linear 0–100% — sharpens the beam or the projected gobo
• Connectors: 3-pin XLR DMX in/out, powerCON power in/out
• IP Rating: IP20 — indoor use only
• Net Weight: 8.5 kg — manageable for one-person rigging on truss or totem

Who the Light4Me MH 7R BEAM 230W Is For

This moving head is aimed at mobile DJs, small-to-mid production companies, clubs, and event venues that want a real beam look without stepping up to flagship pricing. The 230W 7R lamp gives enough output for mid-sized halls, gym events, and club nights, while the LED ring adds a modern accent that reads well on camera and on social-media clips. The 16-channel DMX footprint makes it easy to drop into an existing console setup, and the auto and sound modes let less technical users run a programmed show straight from the fixture. The Light4Me MH 7R BEAM 230W is the right choice for operators who need a beam head with discharge-lamp intensity, an LED ring, and a full gobo and prism toolkit in one IP20-rated housing.