- Drive: Belt Drive
- Speed: 33 RPM, 45 RPM
- Tonearm: Aluminium
- Cartridge: Audio Technica AT-3600
- Wow and Flutter: 33: ±< 0.15%, 45: ±< 0.15%
Lenco LS-500 Oak Turntable kit
The Lenco LS-500OK turntable is a complete vinyl-ready package: belt-drive deck, built-in amplifier, and two separate wooden speakers delivering 2 x 30 W RMS. Designed for plug-and-play listening, it plays both 33 and 45 RPM records and streams music from any phone or tablet via Bluetooth 4.2. The walnut finish and removable dust cover give it a classic look that suits living rooms, studies, and bedrooms alike.
- Audio-Technica AT-3600 moving-magnet cartridge pre-installed for accurate tracking from the first spin
- Two external wooden speakers with 2 x 30 W RMS output allow the system to fill a room without needing a separate amplifier.
- Bluetooth 4.2 receiver streams music from phones and tablets within a 10 m range
- Adjustable counterweight, anti-skating, and mechanical arm lift protect records and extend stylus life
Lenco LS-500OK Turntable — Complete Vinyl System in One Box
The Lenco LS-500OK turntable ships as a ready-to-play package: belt-drive deck, built-in phono preamp, and two wired wooden speakers. Drop a record on the aluminium platter, switch between 33 and 45 RPM, and music plays through the bundled 2 x 30 W RMS speakers with no extra components needed. Bluetooth 4.2 reception turns this model into a wireless speaker for phone or tablet streaming. The walnut finish and removable dust cover suit any shelf or sideboard.
What Sets It Apart
Most all-in-one decks cut corners on the cartridge, but the LS-500OK ships with an Audio-Technica AT-3600 moving-magnet cartridge pre-mounted on a standard headshell. The straight tonearm carries an adjustable counterweight and anti-skating, so stylus pressure can be tuned for cleaner tracking and longer record life. A switchable phono stage leaves room to upgrade to a dedicated amp later.
Drive, Speeds, and Signal Chain
The belt-drive motor isolates the aluminium platter from motor vibration, keeping wow and flutter below ±0.15 % at both speeds. A 72 dB signal-to-noise ratio keeps surface noise low during quiet passages, while RCA outputs and wired speaker terminals sit on the back panel alongside a 1.83 m mains cable.
- The unit features belt drive with 33 RPM and 45 RPM speeds, making it compatible with full LPs as well as 7", 10", and 12" singles.
- Cartridge: Audio-Technica AT-3600 (MM) — proven moving-magnet tracking out of the box
- Tonearm: 218.5 mm effective length, 18.5 mm overhang — geometry matched to the supplied headshell
- Wow and Flutter: ±< 0.15 % at both speeds; Signal-to-Noise: 72 dB; Bluetooth: 4.2, receive, up to 10 m
Who This Instrument Is Built For
It is the right choice for first-time vinyl owners and casual listeners who want a complete system without researching separate amps, speakers, and phono stages. Its plug-and-play setup suits anyone moving into a first apartment or returning to records after years away. Bluetooth streaming adds value for households wanting the same deck to handle phone playlists between record sides.
Lenco — Swiss Vinyl Heritage Since the 1960s
Lenco is a European audio brand founded in Switzerland after the Second World War, with turntable production stretching back to the 1960s. The instrument continues that lineage in a modern all-in-one form, pairing a classic belt-drive deck with contemporary wireless features for today's living spaces.
Drive: Belt Drive
This product is powered by a Belt Drive system, which means the motor drives the platter via an elastic belt. This system helps reduce vibrations and noise transferred from the motor to the platter, leading to a cleaner sound. Belt Drive is often preferred by audiophiles seeking high sound quality.
Speed
- 45 RPM
- 33 RPM
Effective Tonearm Length: 218.5 mm
Effective Tonearm Length refers to the length of the turntable arm that is effective in tracking the grooves of the vinyl record. This parameter affects the accuracy and quality of tracking, contributing to better sound reproduction. This product features an Effective Tonearm Length of 218.5 mm.
Cartridge: Audio Technica AT-3600
The package includes the Audio Technica AT-3600 cartridge, which is an essential component of the turntable, responsible for picking up sound waves from the vinyl record and transmitting them to the audio system.
Overhang: 18.5 mm
Overhang is the distance between the stylus tip and the center of the record when the tonearm is correctly aligned. A proper overhang helps minimize distortion and improves overall playback accuracy. This product features an Overhang of 18.5 mm, contributing to precise tracking and balanced sound.
Wow and Flutter
- 33: ±< 0.15%
- 45: ±< 0.15%
Bluetooth: Yes
Integrated Bluetooth technology enables wireless connectivity and easy pairing with a wide range of compatible devices. This connection method ensures convenient and efficient use without cables, contributing to greater flexibility and ease of use.
Signal to Noise Ratio: 72 dB
Signal to Noise Ratio (SNR) represents the ratio between the useful audio signal and the noise that may occur during playback. A higher SNR value means cleaner sound with less noise. This product achieves an SNR of 72 dB.
Drive
Speed Change
Manual Speed Control
Speed Variance
33: ±1%, 45: ±1%
Tonearm
Aluminium
Effective Tonearm Length
218.5 mm
Tonearm Lift
Manual
Platter
Overhang
Wow and Flutter
Preamp Built-in
Yes
Power-Amp Built-In
Yes
Built-in Speaker
No
CD-R/RW
No
WiFi
No
Bluetooth
Yes
Mounting System
Horizontal, Table
Bundle
Yes
Tonearm Position
Right
Display
No
Power (Watt)
60
Frequency Range
Signal to Noise Ratio
Inputs
No
USB
No
SD Slot
No
Outputs
Banana, RCA, Speaker OUT
Cartridge
Audio Technica AT-3600
Package Contents
Manual, Adapter, Loud Speaker (2 x), 45 RPM Adapter, Counterweight, Cleaning Cloth, Cartridge, Dust Cover, Slipmat
Battery Operation
No
Power Supply
Adapter
Height (cm)
41,8
Width (cm)
34,6
Depth (cm)
12,3
Net Weight (kg)
5,7
Made in
China
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.